USAfixTM - Repair Guide (RG) - Master

Email RG

- Check the solution switch

Level of Difficulty - HIGH	Estimated Completion Time - 10 minutes
TASKI - SWINGO 150
	Tools Required Tool   Screwdriver-phillips Volt meter (True RMS capable)
	Parts Required

Step   Procedure & Parts & Tools 1 PULL DOWN ON THE HANDLE RELEASE LEVER AND LIFT UP ON HANDLE TO REMOVE IT. 2 REMOVE THE 6 SCREWS IN BACK OF HANDLE. Screwdriver-phillips 3 LIFT UP ON THE BACK OF HANDLE TO SEPARATE FROM THE FRONT OF HANDLE. 4 LOCATE THE SOLUTION SWITCH (THIS IS THE GREEN SWITCH). PULL THE WIRE CONNECTORS TO DISCONNECT ALL THE WIRES. 5 PLACE THE VOLT METER LEADS ON THE BOTTOM 2 POSTS OF SWITCH.(DOES NOT MATTER WHICH ONE GOES WHERE). SET THE VOLT METER TO CONTINUITY. THE VOLT METER SHOULD BEEP. IF SWITCH IS OKAY, REVERSE STEPS 1 THRU 4 TO REASSEMBLE MACHINE. Volt meter (True RMS capable)